Atmizoo – Tripod 2 RTA Delux Edition

The Tripod2 comes as the successor of the Tripod. It is Atmizone’s fresh suggestion of 22mm outer diameter RTA. The usual CNC high-precision parts, bespoke silicon gaskets and high-quality materials are always there. Stellar performance, easier top refill, real-time access to deck, meet with top-notch functional customization and real-time configuration of airflow. Fresh ideas and user feedback have come to further improve the classic Tripod design, to a smaller, more efficient, and overall better Tripod2.

SS Matte is a light-brushed matte/satin finish, close to the natural appearance of CNC processed Stainless Steel.

More about maintenance and cleaning in the Precautions section of the Tripod2 manual, as well as our support section.

Tripod2 functional features

The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve the rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod2 deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.

The Air Flow
The big change comes with the real-time configuration of the airflow. We have skipped the outdated adjustment via the airflow control ring and decided that the airflow should be regulated in a more straightforward way, right under the coil, through fixed airflow tubes. But this, with the ability to swap airflow tubes any time / real time, keeping the build and the liquid inside the tank absolutely intact. You may dial in your airflow via five-pin options, with air hole diameter 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm respectively, pinned inside a D=4.0mm nest, plus through five airflow tubes with air hole diameter 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as pins nest), or use no tube and enjoy a perfect, airy 5.0mm Direct Lung draw.

The Chimneys
The Tripod2 will come with two Chimney options out of the box, carefully designed to serve MTL and tight rDL experience (Restricted Chimney) on the one hand, and loose rDL with DL (Open Chimney) on the other. We have found this to be a simpler design solution, more friendly to the end user compared to the use of reducers, plus the fact that the stock tank capacity 2ml with the Open Chimney on, is increased to a useful 2.8ml when assembling the Restricted Chimney.

The Tips
Two bespoke 510 tips come with the Tripod2 device package, a wide and a narrow version for different user styles. Apart from those, you can use any 510 tip of your liking without exceptions.

The functions
Real-time access to the deck and real-time configuration of airflow is achieved by evolving the rotary function of the classic Tripod. We have incorporated stop points so that the user does not need to look for aligning signs, and included a quick release mechanism that allows the base of the RTA to stay screwed on top of the mod, while the rest of the RTA is released instantly to allow you swap the airflow pins/tubes in a sec. Add to these an improved Top Cap with start and stop points (no signs to align) which makes refilling a piece of cake. It can host any 510 tip of your liking without exceptions – that is, apart from the two, bespoke 510 tips that will come with the Tripod2 device package, a wide and narrow version for different user styles.

What’s in the box

Deluxe Edition

• 1 x Tripod2 RTA (pre-installed: 1 x Open Chimney, 1 x Nut 5, 1 x 510 Wide Drip Tip, Air Flow Tube 4.0mm)
• 1 x Set of Spares (2 x Post Screws, 1 x O-rings Kit, 1 x Restricted Chimney, 1 x Nut 3.5, 1 x 510 Narrow Drip Tip, 1 x Tank Body Stock, Phillips Screwdriver Tool, Air Flow Tubes Kit 2/2.5/3/3.5mm, Universal Air Flow Pins Kit 0.8/1/1.2/1.5/1.8mm)
• 1 x User Manual
• 1 x Warranty Card